This article will highlight the best small tap handles. These short pieces of hardware replace the standard long threaded post and wingnut typically used on taps to dispense beer from a keg. Tap handles designed for smaller kegs are designed so that the nozzle of a draft beer faucet mates with it directly rather than resting on something that the keg rests on.
Articluate:
Tap handles have been around for centuries. The story of the invention of this piece of hardware goes back to the European Medieval era, where they used them to open up wells and sweet water by pushing down on a lever handle.
Comparison Chart For Best Small Tap Handles
| SL | Product Image | Product Name | Rating | Action |
|---|---|---|---|---|
| 1 |
T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws |
|||
| 2 |
Irwin 0 – 1 or 2 Hanson Adjustable Tap Wrench |
|||
| 3 |
Beer Tap Faucet Handle Black – Set of 6 |
|||
| 4 |
Chalkboard Beer Tap Handles – 2-Pack Wooden Walnut Beer Tap Handles With Chalkboard And Pen – Best For Homebrew |
|||
| 5 |
IRWIN Hanson 12002 T-Handle Tap Wrenches |
Best Small Tap Handles Reviews
T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws
Product Highlights:
– -Knurled cap on jaws can be tightened to grip the tap, reamer, screws, etc.
– -Ranges from 1/16″ to 5/32″ for one jaw, 5/32″ to 1/4′ for the other two jaws.
– -Taps and ream
– ers come in square shafts, while screw extractors and other tools come in a hex shape, so you’re able to use this wrench set on either type.
– -The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice
There is a variety of wrenches designed for plumbing, auto and industrial use, but no matter what task at hand, one thing you need for optimum efficiency is a solid grip! Make sure your work stays on track and the job gets done quickly when you are not frustrated by getting your tools and parts twisted.
This is where a tap wrench set comes in as the right friend to have on your job site.
Tap wrenches come in a variety of types, but this one has the look and feel of the basic design you wish you had when you don’t.
Irwin 0 – 1 or 2 Hanson Adjustable Tap Wrench
Product Highlights:
– -For use with metric or inch tap
– -11.5″ open
– -Adjustment range of 1/8″ -1/2″
– -Rugged ABS handle with side serrations
– -Ergonomic design with cushioned handle and joint virtually eliminates wrench chatter
– -Pivots forward with heavy tapping to provide maximum comfort
– -Limited three year warranty
.
Irwin 0 – 1 or 2 Hanson Adjustable Tap Wrench. They have either a 0.25″ or 0.5″ capacity. Made of chrome vanadium steel they allow for all the turning force of one hand and don’t require 2 handed usage.
Beer Tap Faucet Handle Black – Set of 6
Product Highlights:
– -Screws onto any standard faucet lever
– -Provides comfortable handle to unscrew your beer and iced tea taps
– -High quality strong plastic, smooth finish
– -About 2-7/8″ long
Great for Draft Beer. Beer taps are used to measure draft beer ale and lager in the brewery and other industrial suitability. They will also be used where packages or cans of beer are packaged in bars, casks of beer and pubs etc. Taps can also be seen in refrigerators filled with different commercially drawn beers. A tap is a valve in the mixing glass that is used to measure liquid in those types of containers.
Chalkboard Beer Tap Handles – 2-Pack Wooden Walnut Beer Tap Handles With Chalkboard And Pen – Best For Homebrew
Product Highlights:
– Made of durable, easy to clean walnut wood
– With black chalkboard covering
– Chalkboard surface that allows you to customize as you please
– Ample space for custom message or signature
– Comes with white chalkboard writing pen
An article about our favorite beer tap handles. One of the many things that motivates us the most about craft beers is its connection to locality. Craft beers had their origin in regions or small communities that used a very specific cultivation technique to achieve a unique flavor. These beers are farm-fresh and artisanal, capturing the nuances inherent to a certain landscape.
Craft beers should evoke the spirit of place, and as such possess a distinct character relative to the terroir and community from which they were created. This is why we love beer tap handles from 2 BUNNYSTAKE. If you love physicality and are stuck with boring kegerator tap handles, these ones are your best bet to make beer pouring more fun! The mix of classic walnut wood and black chalkboard gives it a genuine look.
IRWIN Hanson 12002 T-Handle Tap Wrenches
Product Highlights:
– The IRWIN Hanson 12002-T T-Handle Tap Wrenches is made of shock-resistant and heat treated S2 steel for maximum strength and hardness. This product is ideal for maintenance and repair work, manufactured in China, the wrench is good for the taps 1/4 to 1/2″ (6.
– 3 -12.7 mm). The sliding handle with spring tension screw provides easing in pulling operations. It has a positive grip knurled knot which ensures thumb rest and the sliding handle with spring tension guarantees the convenience when you are trying to loosen or tighten tugging up to object that is below ground-level.
The IRWIN Hanson 12002 T-Handle Tap Wrenches. When the IRWIN Hanson 12002 T-Handle Tap Wrenches were manufactured, their primary industries were construction and maintenance machinery. These two industries are heavily reliant on the production of tools to achieve maximum productivity. The IRWIN Hanson 12002 T-Handle Tap Wrenches were responsible for making sure taps 14-inch to 12-inch long, that are used in both industries, perform well and last.
The IRWIN Hanson 12002 T-Handle Tap Wrenches rode a rollercoaster of success at the start of their production life cycle. With a sudden spike of interest, the demand for the IRWIN Hanson 12002 T-Handle Tap Wrenches began to grow higher and higher. As this trend continued to rise, the reliability began to drop for quality.
Frequently Asked Question
How tall are beer tap handles?
Beer tap handles are typically between 12 and 18 inches tall.
What are the tap handles called?
They are called “Tappers”.
How do you measure a tap handle?
The tap handle is measured from the top of the handle to the bottom of the handle.
How long is a tap handle?
The length of a tap handle is about 10-12 inches.
Are all tap handles the same size?
No, they are not. The size of the tap handle is determined by the size of the keg it is designed to fit.
Conclusion
I believe that the best small tap handles are some of the ones featured on our list above because they have a simplistic design, they don’t take up much space, they are made of good materials, and they come from reputable companies.