Buying Guide For Best Cam For Ford 302 Reviews With Scores

Best Cam for Ford 302 – What’s the best camshaft for a Ford 302?

Ford has been building the 302 engine since the early 60s. It is a strong and simple straight-six engine that can withstand a wide range of modifications. When it comes to camshafts, there are complex, sophisticated cams which atomize the air / fuel mixture in an incredibly fast time, but there are also more affordable, conventional cams.

What’s the best cam for ford 302?

That’s the million dollar question.

None

Comparison Chart For Best Cam For Ford 302

SL Product Image Product Name Rating Action
1

COMP Cams 235 Engine Finishing Kit for Small Block Ford

9.6/10
2

COMP Cams CL31-603-5 Big Mutha Thumpr 243 or 257 Hydraulic Flat Cam and Lifter Kit for Ford 221-302

9.4/10
3

Lunati 20350712 Voodoo 231 or 239 Hydraulic Roller Cam Ford 351W and 302 H.O.

9.2/10
4

Ford Racing M6253A50 Roller Camshaft Conversion Kit

9.1/10
5

COMP Cams 35-518-8 Xtreme Energy Computer Controlled 224 or 232 Hydraulic Roller Cam for Ford 5.0L

8.5/10

Best Cam For Ford 302 Reviews

COMP Cams 235 Engine Finishing Kit for Small Block Ford

Product Highlights:

– -Finishing kit has worked for all engine sizes for over 20 years
– -Jumpstarting the process of painting engine parts to keep them gay longer
– -Airtight design can keep paint inside so it does not over dry or spill out
– -Painting the outside can protect it from rusting but repainting
– often to keep it protected

COMP Cams Engine Finish Kit. Complete engine finishing oil kit composed of the following items: COMP Cams 100% virgin petroleum based RACE-GOOD synthetic engine oil (12×1.5 oz tubes), COMP Custom filter element + holder, COMP DuraLube grease 12g stick, XAML = R* cold filter preventer 12.5 pints, COMP Custom engine cleaners 66ml Bottle, COMP Cams Gas Treatment 12ml Pump spray bottle.

The perfect after-installation kits.

Check Price On Amazon

COMP Cams CL31-603-5 Big Mutha Thumpr 243 or 257 Hydraulic Flat Cam and Lifter Kit for Ford 221-302

Product Highlights:

See also  Buying Guide For Best Cadillac Bumper Fillers In [2022]

– Cl Kits have a camshaft, a set of lifters, instructions and assembly lubricant. Clamp load on these kits ranges from 280 Lifters on a kit with a duration of less than 285@.050″ to 245 on a kit with a 343@.050″.
– Camshafts have
– a wide selection of durations for oval-track racing, street performance, high-end engines with low compression ratios, and stock replacement engines.
– Cams are recessed into the lifter buckets for flat tappet clearance. The mens of the input shaft is off-set to allow installation on the

Quicker acceleration, better response, and all-around better performance are yours for the taking with the addition of Comp Cams’ CL31-603-5 Big Mutha Thumpr 243 or 257 Hydraulic Flat Cam and Lifter Kit for Ford 221-302. What makes this cam kit your next upgrade? Well, the CL306-5 is an economy cam while still retaining excellent performance. The 243257 duration at .050″ will work well with any ported heads, intake, gears and headers, 4200 to 6300 stall converter, or other mods combined.

It will provide plenty of power for streetstrip cars set up to run 9.5:1 compression, good idle quality, good torque level, and fast throttle response.

Check Price On Amazon

Lunati 20350712 Voodoo 231 or 239 Hydraulic Roller Cam Ford 351W and 302 H.O.

Product Highlights:

– -High performance street/bracket cam. Needs 10:1 compression minimum, increased induction and exhaust. Needs 3.55+ gearing. Requires computer mods. Strong above 3500 RPM, 2400-6400 RPM operating range, and 231/239 degrees of duration at .050″ with 112 lobe separation angle for
– leaner power.
– Efficient with achieving optimum power in many configurations.
– No Compromises -Provides your focus for high-end street/strip performance with the highest horsepower and torque in the industry.
– Made in USA
– Package Includes: Lunati camshaft, LUN-13

Lunati 20350712 Voodoo 231 or 239 Hydraulic Roller Cam Ford 351W and 302 H.O. gh performance streetbracket cam. Needs 10:1 compression minimum, increased induction and exhaust. Needs 3.55+ gearing. Requires computer mods. Very strong above 3500 RPM. 2400-6400 RPM Operating Range. 231239 Duration at .050″. 112 Degree Lobe Separation Angle. 0.571″0.587″ Valve Lift. More Power Where It Matters – Lunati’s Voodoo cams deliver more area under the curve than any other camshaft series.

See also  Buying Guide For Best Budget Coilovers G35 - To Buy Online

No Compromises – Lunati’s Voodoo series delivers more throttle response, quicker acceleration, more vacuum and better efficiency.

Check Price On Amazon

Ford Racing M6253A50 Roller Camshaft Conversion Kit

Product Highlights:

– Ford Racing M6253A50 Roller Camshaft Conversion Kit is designed for 1985 -2002 Ford engines. Specifically, 304 V8 motors with stock cylinder heads, 351W motors with stock aluminum 302 cylinder heads, 302 motors using intake manifold mounted lifters, 351C motors using intake manifold mounted lifters. The
– 7.5 mm solid roller cam with 1.4 mm stock seats in the retainer plate includes 4 +1 offset profile lifters, 8 lifter bushings, 2 bolt in guide plates with 2 mounted guide pins, extra gaskets for intake camshaft in engine block intake, 2 oil tubes mounted with

Ford Racing M6253A50. Make Any Vehicle Sound Like a Hot Rod!. Talk about popularity, the Ford Mustang GT has been quite popular for years. It has been pretty much an iconic status-symbol for many many people. As the Mustang’s popularity rose, people wanted other Ford vehicles to sound like a Mustang. Luckily, the M6259A50 Roller Cam Conversion Kit by Ford Racing is a solution to all their problems.

What Does It do?. The M6259A50 Roller Cam Conversion Kit allows you to convert any old vehicle into a hot rod that roars! This conversion kit allows the camshaft timing to be adjusted from a normal production camshaft, to a roller camshaft. The kit comes with 8 hydraulic roller lifters, 1 retainer plate and 2 bolts.

Check Price On Amazon

COMP Cams 35-518-8 Xtreme Energy Computer Controlled 224 or 232 Hydraulic Roller Cam for Ford 5.0L

Product Highlights:

– COMP Cams 35-518-8 Xtreme Energy Computer Controlled 224 or 232 Hydraulic Roller Cam for Ford 5.0L.
– Valvespring upgrade required
– : 274/282 Advertised Duration, 224/232 Duration @.050 inch, .555 inch/.565 inch Lift, 112 Lobe Separation.
– HYDRAULIC ROLLER -Xtreme Energy Computer Controlled: 2500+ stall, 3.55-3.73 gears,

The COMP Cams 35-518-8 Xtreme Energy Computer Controlled 224 or 232 Hydraulic Roller Cam is an excellent choice for those looking for a new and powerful cam. This cam is intended for those with high r.p.m. engines. If you’re looking for a small power increase on your 5.0L EFI engine, this cam is not for you. This cam is the “honey badger” among cams.

See also  Top Best Go Kart Frame With Expert Recommendation

Stronger than ever! It can take you to the next level of power for enduro cars, drag cars, American muscle cars, Pony Cars. Excellent street performance with added throttle response. Improved torque and HP throughout the power band makes repeated hard acceleration less abrupt. Boasting enough performance capability to take your street machine to the track, the SERIES 35 Xtreme Energy hydraulic roller cam offers something for everyone! Want extra horses? Check.

Check Price On Amazon

Frequently Asked Question

Can you put a cam in a stock 302?

Yes, but it will be a lot of work.

How do I pick a cam for a 302?

The cam you pick for a 302 is going to be determined by the heads you have on it. If you have stock heads, then a mild cam is all that is needed. If you have aftermarket heads, then a more aggressive cam can be used.

What is a good cam for a 302?

The best cam for a 302 is a mild cam. A mild cam will give you good low end power and good high end power. A mild cam will also give you good gas mileage.

How much HP does a stage 4 cam add?

The cam adds about 10-15 HP.

How can I get more power out of my 302?

There are a few things you can do to get more power out of your 302. First, you can install a set of headers. This will allow the exhaust gases to exit the engine faster, which will increase horsepower. You can also install a set of long-tube headers, which will allow the exhaust gases to exit even faster.

Conclusion

Ford 302

Ford 302 camshafts are among the best products on the market. They are available in different lengths, which mean that you will be able to find one suitable for your needs.